Icom UHF IC-F60 Instruction Manual Download Page 61

Page: 61 / 68

BATTERY CHARGING

Rapid charging with the BC-121N+AD-100

The optional BC-121N allows up to 6 battery packs to be charged
simultaneously. The followings are additionally required.
• Six AD-100 charger adapter
• A power adapter (BC-157) or the DC power cable (OPC-656)

MULTI-CHARGER

Power adapter
(Purchase

separately.)

Battery pack

*See the instruction

manual for details of the
charger LED indication,
operation, etc.

Transceiver

Turn OFF the power

AD-100 charger
adapters are
installed
in each slot.

CAUTION: NEVER

connect the OPC-

656 to a power source using reverse po-
larity. This will ruin the battery charger.
Red line: Black line

IMPORTANT!
Ensure the guide
tabs

the

battery  pack  are
correctly  aligned
with  the  guide
rails inside of the
charger adapter.

Guide rails

Tabs

DC power cable
(OPC-656*)
(Connect with

the DC power
supply; 13.8 V/
at least 7 A)

Summary of Contents for UHF IC-F60





































































Search results

Summary of Contents for UHF IC-F60

Reviews:

Related manuals for UHF IC-F60

Brands by name

Popular brands

Icom UHF IC-F60, Instruction Manual

Search results

Summary of Contents for UHF IC-F60

Reviews:

Related manuals for UHF IC-F60

Brands by name

Popular brands