![background image](http://html1.mh-extra.com/html/icom/uhf-ic-f60/uhf-ic-f60_instruction-manual_3870563007.webp)
vi
DO NOT
modify the transceiver. The specifications may change and
then not comply with the requirements of a corresponded regulation. The
transceiver warranty does not cover any problems caused by unauthor-
ized modification.
DO NOT
operate the transceiver near unshielded electrical blasting
caps.
DO NOT
use harsh solvents such as benzine or alcohol when clean-
ing, as they will damage the transceiver surfaces.
BE CAREFUL!
The transceiver meets IP67* requirements for dust-
tight and waterproof protection. However, once the transceiver has been
dropped, dust-tight and waterproof protection cannot be guaranteed be-
cause of possible damage to the transceiver’s case or the waterproof seal.
* Only when the battery pack and jack cover are attached.
BE CAREFUL!
The transceiver will become hot when operating it
continuously for long periods of time.
MAKE SURE
to turn OFF the transceiver power before connecting or
disconnecting the supplied/optional accessory.
Even when the transceiver power is OFF, a slight current still flows in the
circuits. Remove the battery pack or batteries from the transceiver when
not using it for a long time. Otherwise, the installed battery pack or bat-
teries will become exhausted, and will need to be recharged or replaced.
FCC CAUTION:
Changes or modifications to this device, not ex-
pressly approved by Icom Inc., could void your authority to operate this
transceiver under FCC regulations.
Summary of Contents for UHF IC-F60
Page 66: ...MEMO...
Page 67: ...MEMO...