manualshive.com logo in svg

Icom UHF IC-F60, Instruction Manual

Share
Download
Icom UHF IC-F60 Instruction Manual Download Page 60

51

6

BATTERY CHARGING

D

 

Rapid charging with the BC-119N+AD-100

The optional BC-119N provides rapid charging of optional Li-ion 
battery packs.
The followings are additionally required:
• An AD-100 charger adapter
•  A power adapter (may be supplied with BC-119N depending on 

version) or the DC power cable (OPC-515L/CP-23L).

Power adapter
(Not supplied with 
 some versions.)

AD-100 

charger 

adapter is installed 
in BC-119N.

Battery pack

Turn OFF the power

Transceiver

Optional OPC-515L* (for 13.8 
V  power  source)  or  CP-23L 
(for  12  V  cigarette  lighter 
socket)  can  be  used  instead 
of the power adapter.

CAUTION: NEVER

 connect 

the  OPC-515L  to  a  power 
source  using  reverse  polar-
ity. This  will  ruin  the  battery 
charger.
White line:        Black line

 

:

*

*See  the  instruc-

tion  manual  for 
details  of  the 
charger  LED  in-
dication,  opera-
tion, etc.

IMPORTANT!

Ensure the guide 
tabs  on  the  bat-
tery  pack  are 
correctly  aligned 
with  the  guide 
rails  inside  the 
charger adapter.

Guide rails

Tabs

Summary of Contents for UHF IC-F60





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands