manualshive.com logo in svg

Icom UHF IC-F60, Instruction Manual

Share
Download
Icom UHF IC-F60 Instruction Manual Download Page 45

36

5

MDC 1200 OPERATION

5

D

 Transmitting a Call Alert

Call Alert allows you to notify another user who may be away from 
the transceiver that you want to talk.

q

  Push [MDC Call] to enter the MDC menu selection mode.

  •  Or push [MDC CallAlert] to enter the transceiver alias selection 

mode. In this case, skip steps 

w

 and 

e

.

w

  Select “CALALERT” using [CH Up], [CH Down], [MDC Up] or 

[MDC Down].

e

  Push [MDC Call] again to enter the transceiver alias selection 

mode.

r

  Select the desired alias using [CH Up], [CH Down], [MDC Up] or 

[MDC Down].

t

  Push [PTT] to transmit the call alert to the selected station.

  • “CA CALL” is displayed.

y

   Release  [PTT].

  • “CA OK” is displayed if the targeted station received the alert.
  •  “CA FAIL” is displayed if the targeted station does not send an ac-

knowledgement.

u

  After a specified time period has passed, the transceiver will re-

turn to receive.

Summary of Contents for UHF IC-F60





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands