Icom SL-1105, Instruction Manual

Page: 25 / 66

different channel, thus eliminating interference between groups.
However, since interference may continue to occur when closely neighboring
channels are used, select channel settings that are at least four channels
apart when using multiple wireless network groups.
Ü
When adjusting channels, be sure to select channels that will not interfere with the
signals other wireless devices.
Ü
When [Network Mode] is set to "Infrastructure", Channels 1 to 14 are scanned
sequentially.
[ESS ID]:default value = LG
This setting item serves as an arbitrary name for identifying a group within
the wireless network. It is used when multiple wireless network groups (e.g.,
peer‑to‑peer) are configured within the wireless transmission area and
there is network information that should not be viewed by other wireless
network groups. Enter the same name as the other members of your wireless
network group.
Ü
When entering the ESS ID, use up to 32 alphanumeric characters. Upper and lower
case are distinguished.
Ü
The ESS ID is distinguished from the "Workgroup Name" setting used on the wired
network, but we recommend using the same name if possible.
[Network Mode]:default value = Infrastructure
This setting item establishes what kind of communication arrangement your
computer will use to connect with the wireless network using the SL‑1105.
Refer to the figures below and select the appropriate connection method.
l
Adhoc : peer-to-peer connection
l
Infrastructure : connection via access point
n Communication arrangements