4
Using the Settings Utility
4-1 About the ICOM SL-1105 Utility
The ICOM SL‑1105 Utility can be used to change the settings of the SL‑1105
without restarting your computer and to monitor the settings and
communication status of the computers operating in the wireless network
group area.
Ü
Windows 95 does not support this utility.
4-2 Installing the ICOM SL-1105 Utility
Install the driver using the LAN Card Utility Software disks.
[IMPORTANT]
Make backup copies of the {SL‑1105 LAN Card Utility Software} disks and
use the backup disks for the operations described in this manual.
1.
Close all applications that are running on your computer.
2.
Insert the backup disk containing the {SL-1105 LAN Card Utility Software} into
the floppy disk drive (Drive A).
3.
Click <Start> and select [Run].
4.
Enter {A:¥Utils¥Setup.exe} in the command box and press the Enter key. When
the setup program starts up, the screen shown below will be displayed. Follow the
instructions on the screen.
Summary of Contents for SL-1105
Page 23: ...l Windows95 ...
