2
WHEN CONNECTING TO THE NETWORK THROUGH A PC
32
In the Base station’s Remote Utility, register users (Remote Stations) to allow them to access the Server.
The Server verifies the user ID and password when users attempt to access the Server. If the User ID or password
is incorrect, the Remote station cannot access the Server.
■
User registration
D
To register a user
q
In the Remote Utility, open the User List screen.
How to open:
Select the ‘Server Setting’ mode,
then click the [User List] tab.
w
Enter a user ID in the
User ID
field, of up to 16
characters, case-sensitive.
You cannot register an already registered ID.
e
Enter a password in the
Password
field, of 8 to 16
characters, case-sensitive.
At least two different characters must be used.
r
To set the user as an administrator, click the
Ad-
ministrator
box to make a check mark.
Administrator users can terminate a connection be-
tween another user and a radio. (p. 39)
t
Click [Add] to save the settings.
After clicking, the User Registration screen ap-
pears. Select radios that you allow the user to use.
• If there are multiple radios to allow the user to use, se-
lect of those radios.
After selecting, click [OK] to save the settings and
close the screen.
NOTE:
• To remove a user from the User List, select its user
ID, and then click [Remove].
The user will not be able to access the Server.
• If you select radios to allow a user to use in the
User Registration screen, the user’s user ID is
automatically registered in the radio’s Permitted
Users list. (p. 35)
To prevent unauthorized access:
Set a long and strong password so that no one can
possibly guess it.
Mix upper and lower case letters, numbers or char-
acters.
q
Select
w
Click
t
Click
w
Enter
e
Enter
q
Select
r
Confirm
