2
WHEN CONNECTING TO THE NETWORK THROUGH A PC
16
■
Connecting the radio to the Base station’s PC
Before connecting the radio to the PC, please finish the installation for the Base station's PC and the Remote sta-
tion's PC, using the RS-BA1 Preparations.
Check the connector type on your radio and see the following chart to connect your radio to the Base station
’
s PC.
To connect an Icom CI-V command capable radio to the Base station
’
s PC, you have to make connections for
control command and audio communication.
RS-BA1 operation with the Base station’s PC connected to the radio’s ACC socket, MIC connector, or S/P DIF jack
for audio communication cannot be guaranteed.
• This guide explains the USB connection as example. See
the RS-BA1 Instruction Manual when connecting to the radio's
[REMOTE] jack or [RS-232C] port.
Radio's connector
Outline
Model
Ref.
Control command
Audio
When connecting to
the radio's [USB] port
Through a USB cable
IC-7100/IC-7200/
IC-7300/IC-7410/
IC-7600
*1
/IC-7850/
IC-7851/IC-9100
When connecting to
the radio's [REMOTE]
jack
Through the CT-17
ci
-
v
level
con
-
verter
Through an audio cable connected
between the PC
’
s audio terminal and
the radio
’
s [ACC] socket or [MIC]
connector
All
When connecting to
the radio's [RS-232C]
port
Through an RS-
232C cable
Through an audio cable connected
between the PC’s audio terminal and
the radio’s [ACC] socket, [MIC] con-
nector or [S/P DIF] jack
IC-7700/IC-7800
*2
D
Select the connection pattern
*
1
When you turn your radio ON or OFF from the Remote Controller, connect to the radio's [Remote] jack.
*
2
When you turn your radio ON or OFF from the Remote Controller, connect to the radio's [Remote] jack or to
the network directly.
