28
7
CHAPTER CONTINUED
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Transmitting DSC calls
■
To ensure correct operation of the DSC function, make
sure you correctly set the CH70 SQL Level. (p. 71)
Transmitting an individual call
D
The Individual call function allows you to transmit a DSC sig-
nal to only a specific station.
Enter “INDIVIDUAL CALL” in the DSC CALLS menu.
q
MENU
➪
DSC
➪
Individual Call
(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)
Select the desired pre-programmed individual address, or
w
“Manual Input,” using dial or [
Y
]/[
Z
], then push [ENT].
• The ID code for the Individual call can be set first. (p. 19)
• When “Manual Input” is selected, set a desired 9 digit MMSI ID
code for the individual you wish to call.
About Manual Inputting:
Enter a desired individual ID in the following way:
• Select a desired number using [
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Push [ENT] or dial to set it.
• To move the cursor, rotate dial or
select either arrow, “
←
” or “
→
,”
then push [ENT] or dial.
• The first digit is specified as ‘0’ for a Group ID. If a Group ID is
entered, an error beep sounds after pushing [FINISH].
• The first two digits are ‘0’ for any coast station ID.
NOTE:
When a coast station is selected in step
w
, the
voice channel is automatically specified by the coast sta-
tion. Therefore, skip step
e
and go directly to step
r
.
+
Continued on the next page.
Summary of Contents for M506 31
Page 122: ......
