80
9
AIS RECEIVER (Depending on versions)
Function display
■
There are three types of function display; plotter, target list
and danger list, and you can select your desired type using
the [DISP] key.
q
Push [MENU].
w
Rotate dial or push [
Ω
]/[
≈
] to select the “AIS” icon and then
push the softkey below the icon.
• AIS plotter is displayed.
e
Push [
Y
]/[
Z
] to adjust the plotter range.
D
Plotter screen
After select the
“AIS”
icon in the menu screen, the plotter screen
is displayed. If the GPS is connected and it receives signals from
a satellite. It shows the display range and the icons of the AIS
targets.
q
DISPLAY TYPE
Shows the selected display type. You can select the dis-
play type from “AIS SET” in the menu screen (p. 87)
• When “N-UP” is displayed, the top of the plotter screen repre
-
sents North.
• When “AC-UP” is displayed, the top of the plotter screen repre
-
sents the direction your course is heading.
w
RANGE/CPA INFORMATION
➥
Shows the range information from your vessel to the se-
lected AIS target.
➥
Shows the CPA (Closest Point of Approach) information
of the selected AIS target whose CPA is within 6 nm
(nautical miles) and TCPA (Time to CPA) is within 60
minutes of your vessel.
e
BEARING/TCPA INFORMATION
➥
Shows the bearing information from your vessel to the
selected AIS target.
➥
Shows TCPA information of the selected AIS target
whose CPA is within 6 nm (nautical miles) and TCPA is
within 60 minutes of your vessel.
r
TARGET BOX
Shows the selected AIS target.
• When a target box appears, push [ENT] to display the detail
screen of the selected AIS target.
1
2
3
4
6
7
8
10
11
12
13
14
15
16
r
y
t
q
e
w
4
9
Summary of Contents for M506 31
Page 122: ......
