65
7
DSC OPERATION
D
Receiving a Test Acknowledgement Call
When a Test Acknowledgement Call is received:
The alarm sounds for 2 minutes.
➥
“Received ACK” is displayed. The LCD backlight blinks for
➥
2 minutes.
Received Call log
■
The transceiver automatically stores up to 50 distress mes-
sages and 50 other messages, and they can be used as a
supplement to your logbook.
• While in the normal operating mode, the “
” icon blinks in the up-
per right corner of the LCD when there is an unread DSC message.
Distress message
D
Push the softkey [LOG] to enter “RCVD CALL LOG” in the
q
DSC CALLS menu, or you can enter it through the Menu
screen.
MENU
➪
DSC
➪
Received Call Log
(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)
Push [
w
Y
]/[
Z
] to select “Distress,” then push [ENT].
• The Distress messages are stored in “Distress.”
• The “
” icon appears when there are unread DSC messages.
• The “
” icon appears when there are no unread DSC mes-
sages.
• No icon appears when there are no DSC messages.
q
Push [ALARM OFF] to stop
the alarm and the blinking
backlight.
• Even if you do not push [ALARM
OFF], the alarm stops after 2
minutes, and then the screen in
step
w
is displayed.
w
Push a softkey to select your
desired action.
[EXIT]
➥
Push to return to the nor-
mal operating mode.
• The transceiver exits the
DSC mode.
• “
” continues to blink and
the Call is stored in the Re-
ceived Call Log.
Summary of Contents for M506 31
Page 122: ......
