THE SELECTION OF A « BANK » IS DONE BY PRESSING
P 1
IF YOU WANT TO SAVE YOUR FREQUENCY ON
CHANNEL 5 OF « BANK » 2
, YOU
WILL HAVE TO SELECT
« BANK » 2
USING
P 1
AND CHECK THAT FIGURE
2
IS
DISPLAYED IN THE TOP LEFT CORNER.
NOTE FOR USING CHANNELS STORED IN BANKS you will have to select the correct
bank by pressing
P 1
(
« bank » 2 in our example) and then rotate the channel selector
to channel 5 to transmit and receive on this channel.
IF YOU WANT TO SAVE YOUR FREQUENCY ON « BANK » 1, THE SELECTION OF THE
BANK WILL STILL HAPPEN USING
P 1
BUT YOU WILL HAVE TO PRESS THIS
BUTTON UNTIL NO FIGURE APPEARS ON THE TOP PART OF THE DISPLAY
INDICATING YOU ARE IN « BANK » 1.
5
SELECT A CHANNEL NUMBER
Example CHANNEL 8
KEY IN
0
8
CONFIRM USING
CH 08
6 PRESS
SIMULTANEOUSLY ON
AND
7
TO ENTER THE TOT PROGRAMMING MODE
TOT ON
7
TO ENABLE OR DISABLE THE TOT
PRESS
+
TOT OFF
8
PRESS
Po
TWICE TO CONFIRM
SET MODE
9 TURN
TRANSCEIVER
OFF
10
THE CHANNEL IS NOW PROGRAMMED WITH THE
TOT FUNCTION
Guideline Télécom MSFB Technical Sheets ICOM IC-F30 LT 05/08/2002
25
