For example, we will add a CTCSS code of 151.4 (for transmission and reception) on
channel 8 (TX = RX Frequ = 152.540 MHz, see above)
SEQUENCE
ACTION
DISPLAY
1 TRANSCEIVER
OFF
2 PRESS
SIMULTANEOUSLY ON
PTT
AND
Po
AND TURN
TRANSCEIVER ON
- - - - - - -
3
KEY IN ACCESS CODE (
159357
OR
258456
) AND
CONFIRM BY PRESSING
SET MODE
4 PRESS
SIMULTANEOUSLY ON
AND
2
ONTHE KEYPAD TO ACCESS THE
PROGRAMMING PER CHANNEL
CH 01
AT THIS POINT YOU CAN PROGRAM THE CHANNEL IN A « BANK ». THERE ARE 6
« BANKS » OF 16 CHANNELS EACH.
THE SELECTION OF A « BANK » IS DONE BY PRESSING
P 1
IF YOU WANT TO SAVE YOUR FREQUENCY ON
CHANNEL 5 OF « BANK » 2
, YOU
WILL HAVE TO SELECT
« BANK » 2
USING
P 1
AND CHECK THAT FIGURE
2
IS
DISPLAYED IN THE TOP LEFT CORNER.
NOTE FOR USING CHANNELS STORED IN BANKS you will have to select the correct
bank by pressing
P 1
(
« bank » 2 in our example) and then rotate the channel selector to
channel 5 to transmit and receive on this channel.
IF YOU WANT TO SAVE YOUR FREQUENCY ON « BANK » 1, THE SELECTION OF THE
BANK WILL STILL HAPPEN USING
P 1
BUT YOU WILL HAVE TO PRESS THIS
BUTTON UNTIL NO FIGURE APPEARS ON THE TOP PART OF THE DISPLAY
INDICATING YOU ARE IN « BANK » 1.
Guideline Télécom MSFB Technical Sheets ICOM IC-F30 LT 05/08/2002
16
