![background image](http://html1.mh-extra.com/html/icom/ifc-30lt/ifc-30lt_manual_2038200024.webp)
24
PROGRAMMING THE « TIME OUT TIMER » (TOT) PER CHANNEL
The " Time Out Timer" function allows to momentarily cut the transmission of a handset to
avoid over extensive use of a given frequency (the emergency channel for example) or
deteriorating the handset due to over heating.
This function is also called « fonction anti-bavards ».
This function is enabled or disabled per channel.
Note :
The elapsed time, in seconds, after which the « Time Out Timer » is activated
And the « TOT PENALTY TIME » (duration, in seconds, during which the transceiver is
unable to transmit) can only be programmed via PC
For example, we will activate the TOT on channel 8
SEQUENCE
ACTION
DISPLAY
1 TRANSCEIVER
OFF
2 PRESS
SIMULTANEOUSLY ON
PTT
AND
Po
AND TURN
TRANSCEIVER ON
- - - - - - -
3
KEY IN ACCESS CODE (
159357
OR
258456
) AND
CONFIRM BY PRESSING
SET MODE
4 PRESS
SIMULTANEOUSLY ON
AND
2
ONTHE KEYPAD TO ACCESS THE
PROGRAMMING PER CHANNEL
CH 01
AT THIS POINT YOU CAN PROGRAM THE CHANNEL IN A « BANK ». THERE ARE 6
« BANKS » OF 16 CHANNELS EACH.
Guideline Télécom MSFB Technical Sheets ICOM IC-F30 LT 05/08/2002