12
PROGRAMMING TX AND RX FREQUENCIES ON A CHANNEL
The easiest case is programming the same frequency in transmission and in reception. This
way of programming a handset is called « SIMPLEX » mode.
If your transmission frequency TX is different from your reception frequency RX, you will
have to follow the instructions carefully to introduce them in the correct place in the
programming sequence.
For example, we will program a frequency of
152.540 MHz on channel 8
, in simplex
mode, meaning the TX and RX frequencies are the same.
SEQUENCE
ACTION
DISPLAY
1 TRANSCEIVER
OFF
2 PRESS
SIMULTANEOUSLY ON
PTT
AND
Po
AND TURN
TRANSCEIVER ON
- - - - - - -
3
KEY IN ACCESS CODE (
159357
OR
258456
) AND
CONFIRM BY PRESSING
SET MODE
4 PRESS
SIMULTANEOUSLY ON
AND
2
ONTHE KEYPAD TO ACCESS THE
PROGRAMMING PER CHANNEL
CH 01
AT THIS POINT YOU CAN PROGRAM THE CHANNEL IN A « BANK ». THERE ARE 6
« BANKS » OF 16 CHANNELS EACH.
THE SELECTION OF A « BANK » IS DONE BY PRESSING
P 1
IF YOU WANT TO SAVE YOUR FREQUENCY ON
CHANNEL 5 OF « BANK » 2
, YOU
WILL HAVE TO SELECT
« BANK » 2
USING
P 1
AND CHECK THAT FIGURE
2
IS
DISPLAYED IN THE TOP LEFT CORNER.
Guideline Télécom MSFB Technical Sheets ICOM IC-F30 LT 05/08/2002
