![background image](http://html1.mh-extra.com/html/icom/ifc-30lt/ifc-30lt_manual_2038200022.webp)
22
PROGRAMMING THE OUTPUT POWER OF A CHANNEL
The setting of the output power is done per channel.
There are three output power levels :
-
HI (high) 5 watts
-
LO 1 (low) 2 watts
-
LO 2 1 watt
Unless faced with special circumstances, always select
high output
power.
It will be relevant to check this setting if you have doubts on the transmission quality of
your handset.
SEQUENCE
ACTION
DISPLAY
1 TRANSCEIVER
OFF
2 PRESS
SIMULTANEOUSLY ON
PTT
AND
Po
AND TURN
TRANSCEIVER ON
- - - - - - -
3
KEY IN ACCESS CODE (
159357
OR
258456
) AND
CONFIRM BY PRESSING
SET MODE
4 PRESS
SIMULTANEOUSLY ON
AND
2
ONTHE KEYPAD TO ACCESS THE
PROGRAMMING PER CHANNEL
CH 01
AT THIS POINT YOU CAN PROGRAM THE CHANNEL IN A « BANK ». THERE ARE 6
« BANKS » OF 16 CHANNELS EACH.
THE SELECTION OF A « BANK » IS DONE BY PRESSING
P 1
IF YOU WANT TO SAVE YOUR FREQUENCY ON
CHANNEL 5 OF « BANK » 2
, YOU
Guideline Télécom MSFB Technical Sheets ICOM IC-F30 LT 05/08/2002