![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_firmware-update_3784351004.webp)
2
1
New2001
DIGITAL MODE OPERATION
z
Push
[
SET
B(D-OFF)]
to enter call sign set mode.
• Push
[
Y
Y
]
or
[
Z
Z
]
to select “CALLS,” if necessary.
x
Push
[
SET
B(D-OFF)]
or
[
ENT
C(T-OFF)]
several
times to select “MyCALL,” then push
[BAND]
.
c
Push
[
Y
Y
]
or
[
Z
Z
]
to select the desired call sign
channel.
v
Push
[BAND]
for 1 sec. to enter call sign pro-
gramming mode.
• The 1st digit blinks.
b
Push
[
Y
Y
]
or
[
Z
Z
]
to select the desired character or
code.
• Push
[
SET
B(D-OFF)]
or
[
ENT
C(T-OFF)]
to move the
cursor to right or left respectively.
n
Push
[
SET
B(D-OFF)]
to select 2nd digit, then push
[
Y
Y
]
or
[
Z
Z
]
to select the desired character or code.
• The 2nd digit blinks (1st digit stops blinking).
• Repeat this step for programming your own call sign.
m
Push
[BAND]
for 1 sec. to save the call sign and
enter the note programming mode.
• Up to a 4-digit of note (operating radio type or area)
can be set.
,
Push
[BAND]
for 1 sec. to save the note and exit
the note programming mode.
.
Push
[
Y
Y
]
or
[
Z
Z
]
to select an another channel
from “M01” to “M06.”
⁄0
Repeat
c
to
,
to program other call sign chan-
nels.
⁄1
Push
[
CLR
A(MW)]
to exit call sign set mode.
NOTE:
During the call sign programming mode
(
v
to
m
)
,
push
[VFO/LOCK
] to clear the entered call sign
(the cursor
returns to the 1st digit position)
, push
[VFO/LOCK
] again to
display the previously saved call sign.
SET
B
ID-800H_FirmupInfo.qxd 05.10.27 9:08 Page 2 (1,1)