![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_firmware-update_3784351016.webp)
14
1
DIGITAL MODE OPERATION
New2001
■
Received call sign
When a call in digital voice mode is received, the calling sta-
tion and using repeater call signs being used can be stored
into the received call record. The stored call signs are view-
able in the following manner.
D
D
Desired call record indication
q
Push
[SET•LOCK]
to enter call sign set mode.
• Rotate
[DIAL]
to select “CALLS” if necessary.
w
Push
[SET•LOCK]
or
[S.MW•MW]
several times to select
the received call indication.
• “RXCALL,” “RXRPT1,” and “RXRPT2” are available for the re-
ceived station, repeater 1 and repeater 2 call signs, respectively.
e
To confirm the received call, push
[BAND•MODE]
to enter
the received call sign indication mode.
• Push
[SET•LOCK]
or
[S.MW•MW]
to display last 6-digit or first
6-digit of the call sign, respectively.
• When “RXCALL” is selected in step
w
, the additional note can
be displayed by pushing
[BAND•MODE]
.
• Push
[BAND•MODE]
once or twice to exit the indication mode.
r
Push one of
[TONE•T-SCAN•BK]
,
[LOW•DUP]
or
[MONI•DTMF•EMR]
to exit call sign set mode.
z
Push
[
SET
B(D-OFF)]
to enter call sign set mode.
• Push
[
Y
Y
]
or
[
Z
Z
]
to select “CALLS,” if necessary.
x
Push
[
SET
B(D-OFF)]
or
[
ENT
C(T-OFF)]
several
times to select the received call indication.
• “RXCALL,” “RXRPT1” and “RXRPT2” are available for
the received station call sign, repeater 1 and repeater
2 call sign, respectively.
c
To confirm the received call, push
[BAND]
to
enter the received call sign indication mode.
• When “RXCALL” is selected in step
x
, the additional
note can be displayed by pushing
[BAND]
.
v
Push
[
CLR
A(MW)]
to exit call sign set mode.
For your information
By selecting “MyCALL,” “UrCALL,” “RPT1 C” or “RPT2 C” at
step
w
as at above left, the programmed call sign can also
be displayed for confirmation.
[DIAL]
rotation is necessary to select the desired call sign
channel in this case.
NOTE:
The record is cleared once turning power OFF, or
overwritten when another call is received.
SET
B
ID-800H_FirmupInfo.qxd 05.10.27 9:08 Page 14 (1,1)