12
1
DIGITAL MODE OPERATION
New2001
D
D
Repeater operation into another zone
q
Set the desired repeater’s frequency, offset and shift direc-
tion in VFO mode.
(instruction manual; p. 21)
• Select “DV” mode in advance.
w
Set your own call sign.
(p. 5)
e
Set the desired station call sign.
(pgs. 6, 7)
• When making a CQ call
Set the desired repeater’s
(in a different zone)
call sign, for
the area you want to make a CQ call, into “UrCALL.”
- “/,” stands for “CQCQCQ,” is added at the 1st digit automatically.
r
Set the repeater’s call sign as follows;
a
Push
[SET•LOCK]
to enter call sign set mode
• Rotate
[DIAL]
to select “CALL” if necessary.
s
Push
[SET•LOCK]
or
[S.MW•MW]
several times to se-
lect “RPT1 C.”
d
Rotate
[DIAL]
to select the nearest repeater’s call sign.
f
Push
[SET•LOCK]
for 1 sec. to set the call sign for
“RPT1 C.”
g
Push
[SET•LOCK]
to select “RPT2 C.”
h
Rotate
[DIAL]
to select the gateway repeater’s
(in the
same zone)
call sign.
• The call sign should have “G” setting as the 8th digit.
j
Push
[SET•LOCK]
for 1 sec. to set the call sign for
“RPT2 C.”
k
Push one of
[TONE•T-SCAN•BK]
,
[LOW•DUP]
or
[MONI•DTMF•EMR]
to exit call sign set mode.
t
Push
[PTT]
to transmit; release to receive.
z
Set the desired repeater’s frequency, offset and
shift direction in VFO mode.
(instruction manual;
p. 21)
• Select “DV” mode in advance.
x
Set your own call sign.
(p. 5)
c
Set the desired station call sign.
(pgs. 6, 7)
• When making a CQ call
Set the desired repeater’s
(in a different zone)
call
sign, for the area you want to make a CQ call,
into “UrCALL.”
v
Set the repeater’s call sign as follows;
a
Push
[
SET
B(D-OFF)]
to enter call sign set mode.
• Push
[
Y
Y
]
or
[
Z
Z
]
to select “CALL” if necessary.
s
Push
[
SET
B(D-OFF)]
or
[
ENT
C(T-OFF)]
several
times to select “RPT1 C.”
d
Push
[
Y
Y
]
or
[
Z
Z
]
to select the nearest re-
peater’s call sign.
f
Push
[
SET
B(D-OFF)]
for 1 sec. to set the call
sign for “RPT1 C.”
g
Push
[
SET
B(D-OFF)]
to select “RPT2 C.”
h
Push
[
Y
Y
]
or
[
Z
Z
]
to select the gateway re-
peater’s
(in the same zone)
call sign.
• The call sign should have “G” setting as the 8th digit.
j
Push
[
SET
B(D-OFF)]
for 1 sec. to set the call
sign for “RPT2 C.”
k
Push
[
CLR
A(MW)]
to exit call sign set mode.
b
Push
[PTT]
to transmit; release to receive.
SET
B
ID-800H_FirmupInfo.qxd 05.10.27 9:08 Page 12 (1,1)
