![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_firmware-update_3784351022.webp)
20
1
DIGITAL MODE OPERATION
New2001
D
D
Message Transmission
Select the message transmission function ON and OFF.
When ON is selected, the transceiver transmits a text mes-
sage (pre-programmed).
(default: OFF)
q
Set the operating frequency, call signs and other settings,
such as repeater, as desired.
w
Push
[SET•LOCK]
to enter message set mode.
• Rotate
[DIAL]
to select “MESSAG,” if “CALLS” or “SET” is dis-
played.
e
Push
[SET•LOCK]
or
[S.MW•MW]
several times until
“TXM-C” appears.
r
Rotate
[DIAL]
to select the desired message channel.
• “C1” to “C6” available.
• See pgs. 18 and 19 for message programming.
t
Push
[S.MW•MW]
to select the message transmission set-
ting, then rotate
[DIAL]
to select “TXM-ON.”
y
Push
[M/CALL•PRIO]
,
[TONE•T-SCAN•BK]
,
[LOW•DUP]
or
[MONI•DTMF•EMR]
to exit message set mode.
u
Push
[PTT]
to transmit and send the selected message si-
multaneously.
z
Set the operating frequency, call signs and other
settings, such as repeater, as desired.
x
Push
[
SET
B (D-OFF)]
to enter message set
mode.
• Push
[
Y
Y
]
or
[
Z
Z
]
to select “MESSAG” if necessary.
c
Push
[
SET
B(D-OFF)]
or
[
ENT
C (T-OFF)]
several
times until “TXM-C” appears.
v
Push
[
Y
Y
]
or
[
Z
Z
]
to select the desired message
channel.
b
Push
[
ENT
C(T-OFF)]
then
[
Y
Y
]
to select “TXM-
ON.”
n
Push
[
CLR
A(MW)]
to exit message set mode.
m
Push
[PTT]
to transmit and send the selected
message simultaneously.
SET
B
ID-800H_FirmupInfo.qxd 05.10.27 9:08 Page 20 (1,1)