![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_firmware-update_3784351011.webp)
9
1
DIGITAL MODE OPERATION
New2001
z
Push
[
SET
B(D-OFF)]
to enter call sign set mode.
• Push
[
Y
Y
]
or
[
Z
Z
]
to select “CALLS,” if necessary.
x
Push
[
SET
B(D-OFF)]
or
[
ENT
C(T-OFF)]
several
times to select the call sign item, then push
[BAND]
.
• “RPT1 C” or “RPT2 C” appears for repeater call sign.
c
Push
[
Y
Y
]
or
[
Z
Z
]
to select the desired call sign
channel.
• “r01” to “r54” appears.
v
Push
[BAND]
for 1 sec. to enter call sign pro-
gramming mode.
• The 1st digit blinks.
b
Push
[
Y
Y
]
or
[
Z
Z
]
to select the desired character
or code.
• Push
[
SET
B(D-OFF)]
or
[
ENT
C(T-OFF)]
to move the
cursor right or left respectively.
n
Push
[
SET
B(D-OFF)]
to select 2nd digit, then
push
[
Y
Y
]
or
[
Z
Z
]
to select the desired character or
code.
• The 2nd digit blinks (1st digit stops blinking).
• Repeat this step for programming other station call
signs.
m
Push
[BAND]
for 1 sec. to save the call sign.
,
Push
[
Y
Y
]
or
[
Z
Z
]
to select an another channel
from “r01” to “r54.”
.
Repeat
v
to
m
to program another station call
sign channels.
⁄0
Push
[
CLR
A(MW)]
to exit call sign set mode.
NOTE:
During the call sign programming mode (
v
to
n
),
push
[VFO/LOCK]
to clear the entered call sign
(the cursor
returns to the 1st digit position)
, push
[VFO/LOCK]
again to
select the previously saved call sign.
SET
B
ID-800H_FirmupInfo.qxd 05.10.27 9:08 Page 9 (1,1)