35
4
PANEL DESCRIPTION
4
@9
FREQUENCY BUTTON [FREQ] (p. 98)
Click to show the receiving signal relative to signal strength
while sweeping..
#0
TIME BUTTON [TIME] (p. 98)
Click to show the received signal strength in the specified
time period while sweeping.
#1
REC BUTTON [
●
] (p. 100)
Click to start recording of the received signal.
#2
STOP BUTTON [
■
] (p. 100)
Click to stop recording.
#3
MEMORY WRITE BUTTON [MW] (p. 70)
Click to write the current receive frequency into the
selected memory channel.
#4
MEMORY CLEAR BUTTON [MCL] (p. 76)
Click to clear the displayed memory channel contents.
#5
BANK UP/DOWN BUTTONS [
Y
]/[
Z
] (p. 68)
Click to change the memory bank.
#6
MEMORY CHANNEL UP/DOWN BUTTONS [
Y
]/[
Z
]
(p. 68)
Click to change a memory channel.
#7
AUTOMATIC GAIN CONTROL BUTTON [AGC] (p. 60)
Click to toggle the AGC (Automatic Gain Control) time
constant between slow and fast.
• “AGC-F” appears when the AGC fast is selected.
#8
ATTENUATOR BUTTON [ATT] (p. 59)
Click to turn the ATT (Attenuator) function ON or OFF.
• “ATT” appears when the ATT function is turned ON.
#9
NOISE BLANKER BUTTON [NB] (p. 60)
Click to turn the NB (Noise Blanker) function ON or OFF.
• “NB” appears when the NB function is turned ON.
$0
AUTOMATIC FREQUENCY CONTROL BUTTON [AFC]
(p. 59)
Click to turn the AFC (Automatic Frequency Control)
function ON or OFF.
• “AFC” appears when the AFC function is turned ON.
$1
VOICE SQUELCH CONTROL BUTTON [VSC] (p. 61)
Click to turn the VSC (Voice Squelch Control) function ON
or OFF.
• “VSC” appears when the VSC function is turned ON.
$2
DTCS SETTING BUTTON [DTCS] (p. 94)
➥
Click to turn the DTCS squelch ON or OFF.
• “DTCS” appears when the DTCS squelch is turned ON.
• Available only when FM mode is selected.
➥
When the DTCS squelch is turned ON, right-click to
display the [DTCS] screen.
$3
TSQL SETTING BUTTON [TSQL] (p. 95)
➥
Click to turn the tone squelch ON or OFF.
• “TSQL” appears when the tone squelch is turned ON.
• Available only when FM mode is selected.
➥
When the tone squelch is turned ON, right-click to
display the [TSQL] screen.
