97
9
TONE SQUELCH OPERATION (Multi-function receiver/Component screens only)
9
■
Tone scan operation
By monitoring a signal that is being operated with pocket
beep, tone or DTCS squelch function, you can determine the
tone frequency or DTCS code necessary to open a squelch.
q
Click
z
FM
x
to select FM mode.
w
Select the tone type, tone squelch or DTCS to be scanned,
then set the desired tone squelch frequency or DTCS
code. (pgs. 81, 82)
e
Click
z
T-SCAN
x
to start the tone scan.
• “AUTO Scan” blinks and
z
AUTO
x
appears while scanning.
r
When the TSQL tone frequency or 3-digit DTCS code is
matched, the squelch opens and the tone frequency is
temporarily programmed into the selected memory chan-
nel.
• The tone scan pauses when a TSQL tone frequency or 3-digit
DTCS code is detected.
• The decoded TSQL tone frequency or 3-digit DTCS code is used
for the tone encoder or tone encoder/decoder depending on the
selected tone condition or type in step
w
.
t
To stop the scan, click
z
STOP
x
or
z
T-SCAN
x
.
☞
NOTE: The decoded tone frequency is programmed tem-
porarily when a memory or call channel is selected. How-
ever, this will be cleared when the memory/call channel is
re-selected.
METER/SCAN
Active band only
MAIN
SUB
• [Compo] screen
• [Receiver] screen
IC-PCR2500
IC-PCR1500
IC-PCR2500
IC-PCR1500
z
T-SCAN
x
z
PAUSE
x
z
T-SCAN
x
z
STOP
x
z
STOP
x
z
PAUSE
x
Appears
Appears
IC-PCR1500
IC-PCR2500
Appears
Blinks
Blinks
Blinks
