84
7
SCAN OPERATION (Multi-function receiver/Component screens only)
■
Auto memory write scan
The auto memory write scan does the same as the pro-
grammed scan and then writes paused signal frequencies
into memory channels of a specified memory bank. Scan
edges must be programmed in advance. (p. 81)
D
Starting an auto memory write scan
q
Make sure the squelch is set to the threshold point (closed
condition).
w
Right-click
z
AUTO
x
to call up the [Auto MW Scan] setting
screen if it is not displayed.
e
Enter the programmed scan range number to be scanned
in [Program No].
r
Select a memory bank to be written, then click the close
([X]) button to close the setting screen.
• To clear the selected memory bank contents, click [All Clear].
q
Click
r
Click
w
Enter the programmed scan
range number to be scanned.
Click to clear the
selected memory
bank contents.
Select a memory
bank to be written.
e
Click to turn
the skip area
function ON.
METER/SCAN
Active band only
MAIN
SUB
• [Compo] screen
• [Receiver] screen
IC-PCR2500
IC-PCR1500
IC-PCR2500
IC-PCR1500
z
AUTO
x
z
AUTO
x
