96
9
TONE SQUELCH OPERATION (Multi-function receiver/Component screens only)
■
DTCS polarity setting
As well as a code setting, the polarity setting is also available
for the DTCS operation. When a different polarity is set, the
DTCS never releases audio mute even when a signal with a
matching code number is received.
q
Click
z
FM
x
to select FM mode.
w
Click
z
DTCS
x
to turn the DTCS squelch ON.
• “DTCS” appears in the function display.
e
Right-click
z
DTCS
x
to display the [DTCS] setting screen.
r
Select the DTCS polarity from “Normal” and “Reverse” in
[Polarity].
t
Click the close button ([X]) to close the [DTCS] setting
screen.
■
Pocket beep operation
This function uses subaudible tones for calling and can be
used as a “common pager” to inform you that someone has
called while you were away from the receiver.
Pocket beep emission type can be set in the [Audio Setting]
screen. (p. 91)
q
Click
z
FM
x
to select FM mode.
w
Click
z
TSQL
x
(or
z
DTCS
x
) to turn the tone (or DTCS)
squelch ON.
• “TSQL” or “DTCS” appears in the function display.
e
Right-click
z
TSQL
x
(or
z
DTCS
x
) to display the [TSQL] (or
[DTCS]) setting screen.
r
Check the [Pocket Beep] check box to turn the pocket
beep function ON.
• “
” appears in the function display.
t
Click the close button ([X]) to close the [TSQL] (or [DTCS])
setting screen.
• [DTCS] screen
w
Click
• [TSQL] screen
w
Click
q
Check the check box to
turn [Pocket Beep] ON.
w
Click
q
Select the DTCS polarity.
• [DTCS] screen
