25
8
DSC OPERATION
New2001
■
Sending DSC calls (other)
D
Sending an Individual call
An Individual call enables you to send a DSC signal to only
a specific station. You can communicate after receiving the
Acknowledgement “Able to comply.”
1.
Push [◄] or [►] to display
.
2.
Push the software key below
.
•
The “Compose Other” screen is displayed.
L
You can also display the “Compose Other” screen by
selecting the “Compose Other” item on the Menu screen.
3.
Push [▲] or [▼] to select “Individual Call,” and then
push [ENT].
•
The “Individual Call” screen is
displayed.
4.
Select the station to send an
Individual call to, and the push
[ENT].
L
You can also select “Manual Input”
to manually enter the calling station.
5.
Select a channel to assign, and
then push [ENT].
L
The assigned channels are preset
by default.
6. Push the software key below [CALL] to send the
Individual call.
•
“Transmitting Individual Call” is displayed, and then “Waiting
for ACK” is displayed.
L
If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
7.
When you receive an Acknowledgement “Able to
comply”:
•
An alarm sounds.
•The screen to the right is displayed.
8. Push any software key to turn
OFF the alarm.
• The channel assigned in step 5 is
automatically selected.
L
If the called station cannot use
the channel that you assigned, a
different channel is selected by the
station.
9. Hold down [PTT] to communicate.
NOTE:
To ensure proper DSC operation, be sure to
correctly adjust the “CH 70 SQL Level” item on the Menu
screen. (p. 44)