39
8
DSC OPERATION
New2001
D
Receiving a Test call
1.
Push any software key to turn OFF the alarm.
2.
Push the software key below your next operation.
[IGN]
•Ignores the call and returns to the operating screen.
•
The call is saved in the DSC Log.
•“
” blinks continuously until you display the call message.
[ABLE]
•
Sends the Acknowledgement “Able to Comply.”
•
The call is saved in the DSC Log.
[ACPT]
•
Accepts the call.
• Displays the received call’s information.
•
The call is saved in the DSC Log.
•
Push the software key below [ACK] to send a Test
Acknowledgement call. (p. 32)
•
Push the software key below [RESEND] to resend.
NOTE
: If the Auto ACK function is set to “Auto,” the Test
Acknowledgement call is automatically sent to the calling
station when the call is received. (p. 42)
When a Test call is received:
•The alarm sounds for 2 minutes.
•
“RCVD Test Call” is displayed.
TIP:
By default, the Auto ACK function automatically
sends an Acknowledgement to the calling station (p. 42).
If the function is set to “Manual,” the following screens are
displayed.