30
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Sending a Test call
You should avoid testing calls on the exclusive DSC distress
channels and safety calling channels. When you cannot
avoid testing on a distress or safety channel, you should
indicate that these are test calls.
Normally the test call would require no further
communications between the two stations involved.
1.
Push [◄] or [►] to display
.
2.
Push the software key below
.
•
The “Compose Other” screen is displayed.
L
You can also display the “Compose Other” screen by
selecting the “Compose Other” item on the Menu screen.
3.
Push [▲] or [▼] to select “Test Call,” and then push
[ENT].
•
The “Test Call” screen is displayed.
4.
Select the station to send the
Test call to.
L
You can also select “Manual Input”
to manually enter the calling station.
5.
Push the software key below [CALL] to send the Test call.
•
“Transmitting Test Call” is displayed.
L
If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
6.
When you receive an Acknowledgement:
•
Alarm sounds.
•The screen to the right is displayed.
7. Push any software key to turn
OFF the alarm.
•
The Acknowledgement
information is displayed.
8.
Push the software key below
[EXIT].
•
“Terminate the Procedure Are
you sure?” is displayed.
9.
Push the software key below
[OK] to return to the operating
screen.