![background image](http://html1.mh-extra.com/html/icom/ic-m93d-euro/ic-m93d-euro_instruction-manual_2038056045.webp)
38
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Receiving a Position Request call
When a Position Request call is received:
•The alarm sounds for 2 minutes.
•
“RCVD POS Request” is displayed.
1.
Push any software key to turn OFF the alarm.
2.
Push the software key below the intended operation.
[ABLE]
•
Sends the Acknowledgement “Able to Comply.”
•
The call is saved in the DSC Log.
[UNABL]
•
Sends the Acknowledgement “Unable to Comply.”
•
Displays the Acknowledgement information, and then
returns to the operating screen by pushing the software
key below [EXIT].
•
The call is saved in the DSC Log.
[ACPT]
•
Accepts the call.
• Displays the received call’s information.
•
The call is saved in the DSC Log.
•
Push the software key below [ACK] to send the Position
Reply call. (p. 33)
[IGN]
•Ignores the call and returns to the operating screen.
•
The call is saved in the DSC Log.
•“
” blinks continuously until you display the call message.
NOTE
:
•
If the Auto ACK function is set to “Auto,” the Position
Reply is automatically sent to the calling station. (p. 42)
•
However, even if the Auto ACK function is set to
“Manual,” after receiving a Distress Acknowledgement, or
while in the Distress Cancel call procedure, the Position
Reply is automatically sent to the calling station.