![background image](http://html1.mh-extra.com/html/icom/ic-m93d-euro/ic-m93d-euro_instruction-manual_2038056050.webp)
43
8
DSC OPERATION
New2001
Unread Return
(Default: On)
This function puts the received DSC call on hold while
receiving another call.
On
: While receiving another call, the received DSC call is
put on hold until the currently receiving call is hung up.
Off
: While receiving another call, the received DSC call is
saved in the DSC Log.
MOB Auto Set
•
MOB Key
(Default: On (30 sec))
For 30 seconds after entering the MOB waypoint, this function
automatically sets the Nature of Distress as “Man Overboard.”
On (30 sec)
: The Nature of Distress is automatically set
to “Man Overboard” for 30 seconds after
entering the MOB waypoint.
Off
:
The function is OFF.
•
Water Detection
(Default: On (30 sec))
For 30 seconds after the transceiver has detected water,
this function automatically sets the Nature of Distress as
“Man Overboard.”
On (30 sec)
: The Nature of Distress is automatically set
to “Man Overboard” for 30 seconds after the
transceiver has detected water.
Off
:
The function is OFF.
■
DSC Settings (Continued)
Alarm Status
Set the alarm ON or OFF for each DSC related item.
•
Safety
(Default: On)
An alarm sounds when a Safety DSC call is received.
•
Routine
(Default: On)
An alarm sounds when a Routine DSC call is received.
•
Warning
(Default: On)
An alarm sounds when:
- no MMSI code is entered.
- the position data has not been received for 2 minutes
after turning ON the transceiver.
- the received position data has not been updated for 10
minutes.
- the received position data or manually entered position
data has not been updated for 4 hours.
•
Self-Terminate
(Default: On)
An alarm sounds when duplicate Distress calls are
received.
•
Discrete
(Default: On)
An alarm sounds when a lower priority call is received
while receiving a high priority call.