![background image](http://html.mh-extra.com/html/icom/ic-m506euro/ic-m506euro_instruction-manual_612839070.webp)
64
7
DSC OPERATION
New2001
D
Channel 70 Squelch level
Set the squelch level on Channel 70.
The transceiver has 11 squelch levels between 1 (loose
squelch) and 10 (tight squelch) and OPEN.
OPEN is completely open.
q
Enter “CH 70 SQL LEVEL” in the DSC Settings menu.
MENU
➪
DSC SET
➪
CH 70 SQL Level
(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)
w
Rotate dial or push [
Y
]/[
Z
][
Ω
]/[
≈
] to adjust the squelch
level until the noise just disappears, then push [ENT].
• Push [BACK] to cancel and return to the previous screen.
(default)
Push [EXIT] to return to the normal operating mode.
e
D
DSC Loop Test
The DSC loop test function sends transmit DSC signals to
the receive AF circuit to compare and check the TX and RX
signals at the AF level.
q
Enter “DSC LOOP TEST” in the DSC Settings menu.
MENU
➪
DSC SET
➪
DSC Loop Test
(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)
w
Push [ENT] to start the DSC loop test.
• Push [BACK] to cancel and return to the DSC Settings menu.
• When the transmit DSC and receive DSC signals are matched,
“OK” appears.
Push [EXIT] to return to the normal operating mode.
e
If “NG” appears in step
w
, either or both TX and RX DSC
circuits has a problem. In that case, you will have to send
the transceiver to your nearest dealer for repair.
Summary of Contents for IC-M506EURO
Page 1: ...INSTRUCTION MANUAL iM506EURO VHF MARINE TRANSCEIVER ...
Page 114: ......