manualshive.com logo in svg

Icom IC-M506EURO, Instruction Manual

Share
Download
Icom IC-M506EURO Instruction Manual Download Page 74

68

8

OTHER FUNCTIONS

RX Hailer function

 

■

The RX Hailer function enables you to hear the received au-
dio on the deck or bridge through a Hailer speaker.
Connect an external hailer speaker as described on page 94.

 Push 

 

q

[RX

 

 

] to enter the RX Hailer mode.

  • The RX Hailer volume level adjustment screen is displayed.

 Rotate dial or push [

 

w

Y

]/[

Z

]/[

Ω

]/[

≈

] to adjust the RX Hailer 

volume level, and then push [ENT].

  • The “RX

 

 

”icon appears.

e  

To return to normal operating mode, push [RX

 

].

  • The “RX

 

 

” icon disappears.

To  adjust  the  audio  output  level  in  the  RX  Hailer  mode, 

hold  down  [RX

 

 

]  for  1  second  to  display  the  RX  Hailer 

volume  level  adjustment  screen,  and  then  rotate  dial  or 
push [

Y

]/[

Z

]/[

Ω

]/[

≈

]. After adjusting, push [ENT] to set it.

Hailer operation

 

■

The IC-M506EURO has a 2 way hailer function, making it un-
necessary to leave the bridge to talk with a another party.
Connect an external hailer speaker as described on page 94.

• Transmitting is not possible while using the hailer.

q

 Push [MENU].

w

  Rotate dial or push [

Ω

]/[

≈

] to select the “HAILER” icon and 

then push the softkey below the icon.

 

• HAILER screen is displayed.

e

  Hold down [PTT] and speak at a normal voice level.

  •  While holding down [PTT], the screen below is displayed.
  • To adjust the hailer level, rotate dial.
  • Push [BACK] to return to the previous screen.

r

  Push [EXIT] to return to normal operating screen.

While  in  the  hailer  mode,  the  transmit  and  receive  func-

tions  are  disabled.  When  the  transceiver  is  transmitting, 
the hailer function is disabled.

Appears

Summary of Contents for IC-M506EURO





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands