63
7
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
DSC Data Output
Select an option for the DSC Data Output function.
When receiving a DSC call, this function makes the trans-
ceiver send the DSC data from its NMEA Output port to a
connected device.
q
Enter “DSC DATA OUTPUT” in the DSC Settings menu.
MENU
➪
DSC SET
➪
DSC Data Output
(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)
w
Rotate dial or push [
Y
]/[
Z
] to set the DSC Data Output
function to “All Stations,” “Station List” or “OFF,” and then
push [ENT].
• Push [BACK] to return to the previous screen.
(default)
All Stations: Outputs the call from any vessel from the
NMEA Output port.
Station List: Outputs the call from any vessels listed on the
Individual ID screen.
OFF:
Does not output any call to the external equip-
ment.
Push [EXIT] to return to the normal operating mode.
e
D
Alarm Status
Set the Alarm function ON or OFF, depending on the Cat-
egory or Status.
q
Enter “ALARM STATUS” in the DSC Settings menu.
MENU
➪
DSC SET
➪
Alarm Status
(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)
w
Rotate dial or push [
Y
]/[
Z
] to select the status, and then
push [ENT].
• Push [BACK] to cancel and return to the DSC Settings menu.
• “ Safety,” “Routine,” “Warning,” “Self-Terminate” and “Discrete” are
selectable.
(default: ON)
Rotate dial or push [
e
Y
]/[
Z
] to set the Alarm setting to “ON”
or “OFF, and then push [ENT].”
Push [EXIT] to return to the normal operating mode.
r
Summary of Contents for IC-M506EURO
Page 1: ...INSTRUCTION MANUAL iM506EURO VHF MARINE TRANSCEIVER ...
Page 114: ......