![background image](http://html.mh-extra.com/html/icom/ic-m503/ic-m503_insrtuction-manual_612817034.webp)
30
12
HM-134 REMOTE-CONTROL MICROPHONE
!1
EXTERNAL SPEAKER JACK
➥
Connect the external speaker (
an 8
Ω
load)
. The internal
speaker can be deactivated via the Set mode program-
ming. (p. 37)
• The speaker output employs a BTL (Balanced Trans-
Less) circuit,
NEVER
connect the speaker cable to
ground (or chassis). Use a floating setup.
CAUTION:
After connecting the external speaker jack,
cover the jack with water resistant tape as shown below to
avoid water seeping into the microphone.
Binding the mic-cable and external-speaker jack connec-
tion mold with water resistant tape increases the water-
proofing of the connection mold.
■
Function display
q
CHANNEL GROUP INDICATOR
(pgs. 6, 32)
Indicates whether an International (INT) or U.S.A. (USA)
channel is selected.
w
KEY LOCK INDICATOR
(p. 34)
➥
Appears while the key lock function is in use.
➥
Flashes while the all key lock function is in use.
e
CHANNEL NUMBER READOUT
➥
Indicates the selected operating channel number. “A”
appears when a simplex channel is selected. (pgs. 6,
32)
CALL
DUP
P SCAN
SCRM
TRI
DUAL
LOW
TAG
USA
INT
L
TX BUSY
VOL
SQL
q
w
r
t
e
!6 !5
!2
!3
!1
!0
o
i
u
y
!4
WAIT
!7
External SP jack
Connection mold
01 IC-M503-(1).qxd 01.12.17 5:00 PM Page 30 (1,1)