![background image](http://html.mh-extra.com/html/icom/ic-m503/ic-m503_insrtuction-manual_612817037.webp)
33
12
HM-134 REMOTE-CONTROL MICROPHONE
■
Receiving and transmitting
q
Push [PWR] to turn power ON.
w
Push [VOL], then [
Y
]/[
Z
] to adjust audio output level.
• Push [SQL], then [
Y
]/[
Z
] to mute any audio noise, if necessary.
e
Push [
Y
]/[
Z
] to select the desired channel.
• When receiving a signal, “
” appears and audio is emitted
from the speaker.
• Further adjustment of audio level may be necessary at this point.
• Use the optional voice scrambler function for privacy. (pgs. 10,
35)
r
Push [H/L] to select the output power, if necessary.
• “LOW” appears when low power is selected.
• Choose low power for shorter, high power for longer distance
communications.
• Some channels are low power only.
t
Push and hold [PTT] to transmit, then speak into the mi-
crophone.
• “
” appears.
• Channel 70 cannot be used for transmission (for GMDSS use).
y
Release [PTT] to receive.
IMPORTANT:
To maximize the readability of your trans-
mitted signal (voice), pause a few sec. after pushing [PTT],
hold the microphone 10 to 15 cm (4 to 6 inches) from your
mouth and speak at a normal voice level.
w
Set volume
w
Set squelch,
if required
r
Set output power
t
Speak into
microphone
q
Turn power ON
e
Set channel
t
Push to
transmit
y
Release
to receive
01 IC-M503-(1).qxd 01.12.17 5:00 PM Page 33 (1,1)