![background image](http://html.mh-extra.com/html/icom/ic-m503/ic-m503_insrtuction-manual_612817010.webp)
6
3
BASIC OPERATION
■
Channel selection
ï
ï
Channel 16
Channel 16 is the distress and safety channel. It is used for
establishing initial contact with another station and for emer-
gency communications. Channel 16 is monitored during both
dualwatch and tri-watch. While standing by, you must monitor
Channel 16.
➥
Push [16] to select Channel 16.
• Output power turns to “25W” automatically, whenever Channel
16 is selected. For example, when selecting Channel 16 via the
dial, a scan stops at Channel 16 or [16•C] on the HM-134 is
pushed, etc.
➥
Push [DIAL] to return to the condition before selecting Chan-
nel 16, or rotate [CHANNEL] to select operating channel.
• Output power returns to the previous output power automatically.
ï
ï
Call channel
Each regular channel group has a separate leisure-use call
channel. The call channel is monitored during tri-watch. The
call channels can be programmed (p. 9) and are used to store
your most often used channels in each channel group for
quick recall.
➥
Push [CALL] to select the call channel of the selected
channel group.
• “CALL” and call channel number appear.
➥
Push [DIAL] to return to the condition before selecting call
channel
,
or rotate [CHANNEL] to select operating channel.
ï
ï
International channels
There are 57 International channels for the IC-M503.
q
Push [DIAL] to select a regular channel.
w
While pushing and holding [HI/LO], push [DIAL]to change
the channel group, if necessary.
• “INT” appears when International channels are selected.
e
Rotate the channel selector to select a channel.
• “DUP” appears for duplex channels.
INT
25W
DUP
TAG
INTL
Push
CALL
INT
25W
CALL
TAG
CALLING
INT
25W
TAG
CALLING
Push
16
01 IC-M503-(1).qxd 01.12.17 5:00 PM Page 6 (1,1)