![background image](http://html.mh-extra.com/html/icom/ic-m503/ic-m503_insrtuction-manual_612817033.webp)
29
12
HM-134 REMOTE-CONTROL MICROPHONE
➥
Enter set mode when pushed and held while turning
power ON. (pgs. 14, 37)
t
DIAL SWITCH [DIAL]
➥
Selects and toggles the regular channels when pushed
momentarily. (pgs. 6, 7, 32)
➥
While pushing and holding [H/L], push to select channel
group. (pgs. 6, 7 and 32)
• The “ EUR” version has International channels only and this
function is not available.
y
DUAL-WATCH/INTERCOM SWITCH [DUAL•IC]
➥
Push to start dualwatch or tri-watch. (pgs. 11, 36)
➥
Push and hold for 1 sec. to activate the intercom func-
tion. (pgs. 17, 38)
➥
Push to stop dualwatch or tri-watch when either is acti-
vated.
➥
While pushing and holding the switch, you can call the
IC-M503 in intercom mode. (pgs. 17, 38)
u
SQUELCH/MONITOR/LOCK SWITCH [SQL•MONI•L]
➥
After pushing [SQL], [
Y
]/[
Z
] sets the squelch threshold
level. (p. 33)
➥
Push and hold [SQL•MONI] for 1 sec. to turn the monitor
function ON. (p. 34)
➥
While pushing and holding [H/L], push [SQL•MONI•L] to
toggle the microphone key lock function ON or OFF. (p.
34)
• “
T
” appears while key lock function is in use.
• [PWR], [PTT], [VOL], [SQL] and [H/L] still function when the
microphone key lock function is turned ON.
➥
Advances the cursor while in memory name program-
ming condition. (pgs. 9, 38)
i
VOLUME/DIMMER SWITCH [VOL•DIM]
➥
After pushing [VOL], [
Y
]/[
Z
] adjusts the audio level.
➥
Push and hold [VOL•DIM] for 1 sec. to adjust the bright-
ness of the LCD and switch backlight. (p. 34)
➥
Moves the cursor backward while in memory name pro-
gramming condition. (pgs. 9, 38)
o
TRANSMIT POWER SWITCH [H/L]
➥
When pushed, toggles high and low power. (pgs. 8, 33)
• Some channels are set to low power only.
➥
While pushing and holding this switch, other switches
perform secondary functions.
➥
Toggles the all key lock function ON or OFF when
pushed and held while turning power ON. (p. 34)
• “
T
” flashes while the all key lock function is in use.
• Only [PWR] and [PTT] function when the all key lock function
is in use.
!0
SCAN SWITCH [SCAN•TAG]
(pgs. 13, 36)
➥
Starts and stops normal or priority scan when tag chan-
nels are programmed.
➥
Push and hold [SCAN•TAG] for 1 sec. to set the dis-
played channel as a tag (scanned) channel.
➥
While pushing and holding [H/L], push and hold for 3
sec. to clear all tag channels.
01 IC-M503-(1).qxd 01.12.17 5:00 PM Page 29 (1,1)