![background image](http://html.mh-extra.com/html/icom/ic-m220/ic-m220_instruction-manual_612743051.webp)
41
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
MENU SCREEN
8
D
Radio Settings
Scan Type
Selects the scan type. The default setting
differs, depending on the transceiver
version.
L
See page 12 for details.
Normal Scan: Scans all Favorite channels
in the selected channel
group.
Priority Scan: Sequentially scans all
Favorite channels, while
periodically checking
Channel 16.
Scan Timer
You can use the Scan Timer to pause, or
to resume after 5 seconds, when a signal
is detected.
On: When a signal is detected on a
channel, the scan pauses for 5
seconds, and then resumes. If
the signal disappears in less than
5 seconds, the scan immediately
resumes.
Off: When a signal is detected on a
channel, the scan pauses until the
signal disappears, and then resumes.
Dual/Tri-watch
Select Dualwatch or Tri-watch.
L
See page 14 for details.
Dualwatch: Periodically checks Channel
16 while operating on another
channel.
Tri-watch: Periodically checks Channel
16 and the Call channel while
operating on another channel.
Channel Group
Select the suitable channel group for your
operating area. Select USA, INT, CAN,
or DSC, depending on the transceiver
version.
L
See page 7 for details.
Call Channel
You can change your Call channel. The
default setting differs, depending on the
transceiver version.
L
See page 10 for details.
WX Alert
For the USA version, an NOAA broadcast
station transmits a Weather Alert tone
before any important weather information.
L
See page 8 for details.
On with Scan: The preset Weather
channels are sequentially
checked while scanning.
On:
The previously selected
(last used) Weather
channel is checked while
scanning.
Off:
The Weather Alert tone is
not detected.
FAV Settings
You can set all channels as Favorite
channels, clear all settings, or reset to
default. By default, some channels are
preset. The Favorite channels differ,
depending on the transceiver version.
L
See page 13 for details.
Set All Channels: Sets all channels as
Favorite channels.
Clear All Channels: Clears all Favorite
channels.
Set Default:
Resets Favorite
channels to the
default.
CH Display
You can select the number of digits to
display the channel number.
L
This setting may not be usable, depending
on the transceiver version or presetting.
3 Digits: The channel number is displayed
in 3 digits, such as “01A.”
4 Digits: The channel number is displayed
in 4 digits, such as “1001.”