![background image](http://html.mh-extra.com/html/icom/ic-m220/ic-m220_instruction-manual_612743021.webp)
11
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC OPERATION
4
■
AquaQuake Water Draining function
Water in the speaker grill may muffle the sound coming from the speaker. The
AquaQuake Water Draining function removes water from the speaker grill by vibrating the
speaker cone.
CAUTION: DO NOT
use the AquaQuake Water Draining function when an external
speaker is connected.
1. Push [◄] or [►] to display
AQUA
.
2.
Hold down
AQUA
to turn ON the function.
•
A low frequency vibration beep sounds to drain the
water, regardless of the volume level setting.
L
This function is activated for a maximum of 10
seconds, even if you continue to hold down
AQUA
.
3. Release the key to turn OFF the function.
■
Editing a channel name
You can edit the name of each operating channel and weather channel, using numbers,
uppercase letters, symbols, and a space. This enables easy recognition of the channels
or stations. All VHF marine channels are set with default names.
L
You can edit channel names only when the “CH Close-up” is set to ON.
[MENU] > Radio Settings >
CH Close-up
1. Push [▲] or [▼] to select the channel to edit.
2. Push [◄] or [►] to display
NAME
.
L
You cannot edit a channel name during Dualwatch,
Tri-watch, or a scan.
3.
Push
NAME
.
•
The “CHANNEL NAME” screen is displayed.
4. Edit the channel name.
5.
Push
FIN
to save the edited name and return to the
operating screen.
TIP:
•Push
123
to display numbers, or
!$?
to display characters.
•
Select characters or space using [▲]/[▼]/[◄]/[►].
•
Select “◄” or “►” on the screen to scroll.
•
Push [ENT] to enter the selected character.
•
Select “←” or “→” on the screen to move the cursor.