![background image](http://html.mh-extra.com/html/icom/ic-m220/ic-m220_instruction-manual_612743014.webp)
4
2
PANEL DESCRIPTION
14
POSITION/TIME READOUTS
Readouts the current position and time
when valid GPS data is received, or
when manually entered. (p. 16)
Received GPS data:
•“NO POS NO TIME” is displayed if
no GPS data has been received, and
then a warning message is displayed
for 2 minutes after turning ON the
transceiver.
•“??” blinks if no GPS data is received
for 30 seconds after receiving valid
GPS data, and then “??” and a
warning message are displayed after
10 minutes.
•A warning message is displayed if no
GPS data is received for 4 hours after
receiving valid GPS data.
Manually entered GPS data:
•A manually entered GPS data is valid
for 23.5 hours, and then a warning
message is displayed.
15
SCAN INDICATOR
•“SCAN” or “SCAN 16” is displayed while
scanning. (p. 13)
•“DW” or “TW” and the watched channel
number is displayed while using the
Dualwatch or Tri-watch function. (p. 14)
■
Function Display (Continued)
■
Software Keys
Various often-used functions are assigned
to the Software Keys for easy access. The
functions’ icons are displayed above the
Software Keys, as shown below.
D
Selecting a Software Key
function
Push [◄] or [►] to slide through the
selectable functions that are assigned to
the Software Keys.
Push the Software Key under the function’s
icon to select the function.
NOTE:
The displayed icons or their order
may differ, depending on the transceiver
version or the presetting.
When the MMSI code is not set, the
Software Keys for the DSC function are
not displayed.