Icom IC-M220 Instruction Manual Download Page 29

Page: 29 / 66

DIGITAL SELECTIVE CALLING (DSC)

Distress Cancel call

If you have accidentally made a Distress call, or made an incorrect Distress call, send a

Distress Cancel call to cancel the call as soon as possible while waiting for an

Acknowledgement. Be sure to report the purpose of the cancellation.

While waiting for an Acknowledgement, push

CANCEL

•The screen to the right is displayed.

2. Push

CONTINUE

•The Distress Cancel call is sent.

•Channel 16 is automatically selected.

Hold down [PTT] to report the purpose of the

cancellation.

You can display the wording of the cancellation by

pushing [▼].

4. After communicating, push

FINISH

The screen to the right is displayed.

5. Push

STBY

to finish the Distress Cancel call.

•

Returns to the operating screen.

While waiting for an Acknowledgement:

CANCEL

: Cancels the Distress call and

enables you to send a Cancel call.

RESEND

: Enables you to resend the

Distress call by holding down

[DISTRESS] again.

PAUSE

: Pauses the countdown to resend

the next Distress call.

INFO

: Displays the information of the

Distress call that you have sent.

After receiving an Acknowledgement:

STBY

: Closes the Distress operation, and

returns to the operating screen.

INFO

: Displays the information

of the received Distress

Acknowledgement.

HIST

: Displays the “DISTRESS

HISTORY.”

HI/LO

Changes the output power.

Distress call Software Key description

Summary of Contents for IC-M220



































































Search results

Summary of Contents for IC-M220

Reviews:

Brands by name

Popular brands

Icom IC-M220, Instruction Manual

Search results

Summary of Contents for IC-M220

Reviews:

Brands by name

Popular brands