![background image](http://html.mh-extra.com/html/icom/ic-f9011b/ic-f9011b_instruction-manual_612678026.webp)
■
Optional battery case (BP-237)
The optional battery case uses 6
×
AA (LR6) size alkaline
batteries. The battery case offers low output power.
q
Hook your finger under the latch, and open the cover in
the direction of the arrow (
q
). (Fig.1)
w
Then, install 6
×
AA (LR6) size alkaline batteries. (Fig.2)
• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
• Do not pin the ribbon under the batteries.
e
Close the cover by fitting in the direction of the arrow (
w
)
first, then check the latch is in place (
e
).
(Fig.1)
• Be sure the gasket is set correctly, and do not protrude from the
battery case.
(Fig.3)
CAUTION:
• When installing batteries, make sure they are all the same
brand, type and capacity. Also, do not mix new and old
batteries together.
• Keep battery terminals clean. It’s a good idea to clean bat-
tery terminals once a week.
• Never incinerate used battery cells since internal battery
gas may cause them to rupture.
• Never expose a detached battery case to water. If the bat-
tery case gets wet, be sure to wipe it dry before using it.
q
BP-237
Fig.1
Fig.2
Fig.3
e
Latch
w
Gasket
21
5
BATTERY CASE