![background image](http://html.mh-extra.com/html/icom/ic-f9011b/ic-f9011b_instruction-manual_612678020.webp)
3
BASIC OPERATION
15
■
Clock function
The transceiver indicates the current time and date when
[Clock] is pushed. And you can change the indication format
and time/date settings.
When you operate Non-display type, this function is not
available.
When you use the transceiver for the first time, or after the
transceiver has sat unused for a long time, make sure to
check the date and time indication after turning the power
ON. If the time and date are not correct, reset them. (See
‘Time and date settings’ to the right.)
D
Time and date indication
q
Push [Clock] to indicate the current time and date on the LCD.
• When the indication format is set to 12-hour, “AM” or “PM” is
indicated.
• The LCD indication returns to the stand-by mode after 30 sec.
has passed with no operation.
12HR 12:00PM
YMD 08-04-01
MON CLCK ZONE
Date indication format (Y: Year, M: Month, D: Day)
The time indication format (12-hour/24-hour)
Time
Date
w
Push [Clock] again to return to the stand-by mode.
D
Time and date settings
q
Push [Clock] to indicate the current time and date on the
LCD.
12HR 12:00PM
YMD 08-04-01
MON CLCK ZONE
w
Push and hold [Clock] for 1 sec. to enter the time and date
setting mode.
• The time indication format, “24HR” or “12HR” blinks.
12HR 12:00PM
YMD 08-04-01
MON CLCK ZONE
e
Push [Clock] to select the desired item to be changed.