![background image](http://html.mh-extra.com/html/icom/ic-f9011b/ic-f9011b_instruction-manual_612678014.webp)
2
PANEL DESCRIPTION
9
PRIO A REWRITE AND PRIO B REWRITE KEYS
“
PRAR
” “
PRBR
”
❍
For Simple/10-key types
➥
Push to select Priority A or Priority B channel.
➥
Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for
1 sec. to rewrite the operating channel as the Priority A or
Priority B channel.
❍
For Non-display type
Push to select Priority A or Priority B channel.
COMPANDER KEY
“
COMP
”
The compander function reduces noise components from
the transmitted audio to provide clear communication.
❍
For Simple/10-key types
Push to toggle the compander function ON and OFF.
❍
For Non-display type
➥
Push and hold for 1 sec. to turn the compander function ON.
➥
When the compander function is ON, push to turn the
function OFF.
OPT OUT KEYS
“
OP1
” “
OP2
” “
OP3
”
❍
For Simple/10-key types
Push to control the output signal level from the optional unit
connector.
❍
For Non-display type
➥
Push and hold for 1 sec. to control the output signal level
from the optional unit connector.
➥
When this key function is activated, push to deactivate
the function.
D
For Simple/10-key types only
Following key functions cannot be programmed to Non-dis-
play types.
CH UP AND DOWN KEYS
“
UP
” “
DOWN
”
➥
Push to select an operating channel. When [Rotary selec-
tor] selection mode is “operating channel,” this function is
not available.
➥
Push to select a scan group after pushing and holding
[Scan].
ZONE KEY
“
ZONE
”
Push this key, then push [CH Up] or [CH Down] to select the
desired zone.
When [Rotary selector] selects “operating zone,” push this
key to switch the range of selectable zones.
What is “zone”?
— Selected channels are assigned to a zone
according to how they are to be used in a group. For example,
‘Staff A’ and ‘Staff B’ are assigned into a “Business” zone, and
‘John’ and ‘Cindy’ are assigned into a “Private” zone.
USER SET MODE KEY
“
SET
”
➥
Push and hold for 1 sec. to enter user set mode.
• During in the user set mode, push this key to select an item that
is enabled by your dealer, and change the value or condition by
pushing [CH Up] or [CH Down].
➥
Push and hold this key for 1 sec. again to exit user set mode.
User set mode is also available via the ‘Power ON func-
tion.’ Refer to p. 14 also.