![background image](http://html.mh-extra.com/html/icom/ic-f7010-series/ic-f7010-series_operating-manual_612658080.webp)
7
APCO P25 MODE OPERATION
7-7
Transmitting a call (Continued)
D
Transmitting a Remote Monitor call
Remote Monitor call enables to send a signal that
requires the target station to transmit the microphone
audio.
(Menu > Signaling/Call >
Call Menu
)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Signaling/Call,”
then push [OK].
3. Push [Up] or [Down] to select “Call Menu,” then
push [OK].
4. Select “Remote Monitor,” then push [OK].
5. Select the target Individual station, then push
[PTT] to transmit a Remote Monitor call.
• “Success” is displayed after receiving an
acknowledgment from the target station.
• “Failed” is displayed if the target station does not send
back an acknowledgment.
6. The microphone audio can be heard for the preset
period of time.
TIP:
Push [Call Menu] to directly display the “Call
Menu” screen in step 4 above.
D
Transmitting a Radio Check call
A Radio Check call enables to determine whether the
target station is turned ON, within the communication
range and on the channel, without requiring any action
from the target station user.
(Menu > Signaling/Call >
Call Menu
)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Signaling/Call,”
then push [OK].
3. Push [Up] or [Down] to select “Call Menu,” then
push [OK].
4. Select “Radio Check,” then push [OK].
5. Select the target Individual station, then push
[PTT] to transmit a Radio Check call.
• “Success” is displayed after receiving an
acknowledgment from the target station.
• “Failed” is displayed if the target station does not send
back an acknowledgment.
TIP:
Push [Call Menu] to directly display the “Call
Menu” screen in step 4 above.