manualshive.com logo in svg

Icom IC-F7010 Series, Operating Manual

Share
Download
Icom IC-F7010 Series Operating Manual Download Page 85

7

APCO P25 MODE OPERATION

7-12

Incoming list

The transceiver saves a log of the received Individual 

calls, Call Alert calls, Status messages, and Messages 

in the memory, depending on the presetting.

Up to 10 Message/Status or 5 Voice/Call Alert calls 

can be saved in the log, and the oldest call record 

is erased when an 11th (Message/Status) or 6th 

(Voice/Call Alert) call is received. However, once the 

transceiver is turned OFF, the all records are erased.

 

D

Displaying the Incoming list

(Menu > Signaling/Call > 

Incoming

)

1.  Push [Menu] to display the Menu screen.

2.   Push [Left] or [Right] to select “Signaling/Call,” 

then push [OK].

  

3.   Push [Up] or [Down] to select “Incoming,” then 

push [OK].

  If there is no log, an error beep sounds and the log is 

not displayed.

  

4.   Push [Up] or [Down] to select “Voice/Call Alert” or 

“Message/Status,” then push [OK].

  

 •Voice/Call Alert:   The received Individual call 

and Call Alert call logs are 

saved.

 •Message/Status:  The received Status message 

and Message logs are saved.

5.   

When “Voice/Call Alert” is selected in step 4:

The “Voice/Call Alert” screen is displayed.

  

 • The calling station name (or ID) is displayed.

“

” is for the Individual calls.

“

” is for the Call Alert calls.

TIP:

 When the “Voice/Call Alert” screen is 

displayed, skip step 6 and go to step 7.

    

When “Message/Status” is selected in step 4:

The “Message/Status” screen is displayed.

  

 • The calling station name (or ID) is displayed.

“

” is for the Status message or Short Message.

6.   Push [Up] or [Down] to select the log, then push 

[OK].

 • The message content is displayed.

  

7.   Hold down [Back] for 1 second to return to the 

standby screen.

Summary of Contents for IC-F7010 Series

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands