manualshive.com logo in svg

Icom IC-F7010 Series, Operating Manual

Share
Download
Icom IC-F7010 Series Operating Manual Download Page 96

8

MDC 1200 SYSTEM OPERATION

8-8

Receiving a call (Continued)

 

D

 Receiving an MDC Emergency call

When an MDC Emergency call is received:

 •Beeps sound.

 • Portable type transceivers may vibrate.*

 • The calling station's ID and “Emergency” is displayed.

 The transceiver automatically may transmit an 

acknowledgment to the calling station, depending 

on the setting.

1.   Hold down [PTT] to speak.

2.   To stop the beep and display indication, do the 

following.

 

Turn OFF the transceiver

 

Change the channel

 

Push a key

 

D

 Receiving an MDC Stun call or Revive 

call

If an MDC Stun call is received that matches your 

station ID, the transceiver will display the 

preset text 

(example: 

“SORRY”

)

 and you cannot receive nor 

transmit.

To use the transceiver again, do the following.

 

 Receive an MDC Revive call that matches your 

station ID.

 

Enter the password.

 

Setup again using the CS-F7500.

 

D

 Receiving an MDC Selective Call (SelCall)

When an MDC SelCall is received:

 •Beeps sound.
 •“ ” is displayed.
 • “

” blinks.

 •The calling station's ID is displayed.

Hold down [PTT] to speak.

* Depending on the presetting.

Summary of Contents for IC-F7010 Series

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands