![background image](http://html.mh-extra.com/html/icom/ic-f7010-series/ic-f7010-series_operating-manual_612658037.webp)
3
BASIC OPERATION
3-8
Receiving and transmitting
CAUTION:
DO NOT
transmit without an antenna. It
may damage the transceiver. See pages 1-3 and 2-6
for accessory attachments.
Receiving:
1. Turn ON the transceiver. (p. 3-2)
2. Select a channel. (p. 3-4)
3.
When receiving a call, rotate [VOL] to adjust the
audio output level to a comfortable listening level.
NOTE:
Depending on the presetting, the transceiver
may automatically transmit the microphone audio
for the preset time period when a matching signal is
received. (Auto TX function)
Transmitting:
Wait for the channel to become clear to avoid
interference.
1.
While holding down [PTT], speak at your normal
voice level.
• To transmit a tone frequency (2-Tone) push [Call].
2. Release [PTT] to return to receive.
IMPORTANT:
To maximize the readability of your
signal.
1. Pause briefl y after pushing [PTT].
2. Hold the microphone 5 to 10 cm (2 to 4 inches)
from your mouth, then speak at your normal voice
level.
D
Transmitting notes
Transmit inhibit function
The transceiver has several inhibit functions which
restrict transmission under the following conditions:
• The channel is in the Inaudible mode (“ ”: Audible
icon does not appear.)
• The channel is busy. However, depending on the
presetting, you can transmit when a call is received
that includes a non-matching (or matching) CTCSS
(DTCS), NAC (Network Access Code), Individual ID,
or Group ID.
• The selected channel is a ‘receive only’ channel.
Time-Out timer
If continuous transmission exceeds the preset Time-
Out Timer time, the transmission is cut off.
Penalty timer
After the transmission is cut off by the Time-Out Timer,
transmission is further inhibited for a preset penalty
period of timer.