![background image](http://html.mh-extra.com/html/icom/ic-e7/ic-e7_instruction-manual_612426093.webp)
16
POCKET GUIDE
Important operating instructions are summed up in
this and the following page for your simple reference.
By cutting along the line and folding on the dotted
line, it will become a card sized operating guide which
can easily be carried in a card case or wallet, etc.
q
Cut
w
Fold
r
Complete
e
Fold
80
q
w
e
r
iE7
■
VFO and memory mode selection
POCKET GUIDE
Push [V/M] to toggle between
VFO and memory mode.
➥
■
Operating mode selection
While pushing and holding
[FUNC], push [CALL] several
times to select the desired
mode.
➥
■
Audio level setting
Push [
Y
] to increase, push [
Z
]
to decrease the audio level.
➥
■
Squelch level setting
While pushing [SQL], rotate
[DIAL] to set the squelch level.
➥
■
Frequency band selection
Push [BAND] several times, or
while pushing and holding
[BAND], rotate [DIAL] to select
the desired frequency band.
➥
■
Tuning step selection
While pushing and holding [FUNC],
push [BAND] to enter tuning step
selection. Then rotate [DIAL] to
select the desired tuning step.
• Push [BAND] again to return to the
previous condition.
➥
■
Monitor function
Push and hold [SQL].
• The 1st segment of S/RF meter blinks.
➥
■
1750 Hz tone burst
Push [PTT] briefly, then push and
hold [PTT] again for 1 to 2 sec.
➥
■
Key lock function
While pushing and holding [FUNC],
push [BAND] for 1 sec. to toggle
the key lock function ON and OFF.
• “
L
” appears when the lock function is
in use.
➥
■
Set mode setting
While pushing and holding
[FUNC], push and hold [SQL]
for 1 sec. to enter
set mode.
Rotate [DIAL] to select the de-
sired item.
While pushing and holding
[FUNC], rotate [DIAL] to set
the desired value or condition.
Push [SQL] to exit
set mode.
q
w
■
Frequency setting
Push [V/M] to select
VFO
mode.
Rotate [DIAL] to set the de-
sired operating frequency.
• While pushing [FUNC], dial rota-
tion changes frequency in 1 MHz
steps.
q
w
■
Memory channel selection
Push [V/M] to select
memory
mode.
Rotate [DIAL] to set the de-
sired memory channel.
• While pushing [FUNC], dial rota-
tion changes memory channel in
10 channels steps.
■
Attenuator function
While pushing and holding
[FUNC], push [SQL] to toggle
the attenuator function ON and
OFF.
• “ATT” appears when the attenuator
function is in use.
➥
■
Transmit power setting
While pushing and holding
[FUNC], push [PTT] to toggle
the transmit output power High
and Low.
• “LOW” appears when the low out-
put power is selected.
➥
<CUT
HERE>
<CUT HERE>