![background image](http://html.mh-extra.com/html/icom/ic-e7/ic-e7_instruction-manual_612426036.webp)
23
5
REPEATER OPERATION
Some European repeaters require a 1750 Hz tone burst to be
accessed. For such European repeaters, perform the follow-
ing.
q
Set the receive frequency (repeater output frequency).
w
Set the shift direction of the transmit frequency. (–DUP or
+DUP; see p. 19 for details.)
• “–DUP” or “+DUP” indicates a minus or plus offset of the transmit
frequency, respectively.
e
While pushing and holding
[PTT]
, push and hold
[SQL] (
ATT
•
SET
)
for 1 to 2
sec. to transmit a 1750 Hz
tone burst signal.
• The displayed frequency auto-
matically changes to the trans-
mit frequency (repeater input
frequency).
• If “OFF” appears, check the off-
set frequency (see p. 20 for de-
tails) or shift direction (p.19).
r
Push and hold
[PTT]
to transmit.
t
Release
[PTT]
to receive.
y
Push and hold
[SQL] (
ATT
•
SET
)
to monitor the repeater
input frequency.
✔
CONVENIENT!
q
Set the receive frequency, or shift direction (see p.19 for
details.).
w
Push
[PTT]
brie
fl
y, then push
and hold
[PTT]
again for 1 to
2 sec. to transmit a 1750 Hz
tone burst signal.
• The displayed frequency auto-
matically changes to the trans-
mit frequency (repeater input
frequency).
• If “OFF” appears, check the off-
set frequency (see p. 20 for de-
tails) or shift direction (p.19).
e
Push and hold
[PTT]
to
transmit.
r
Release
[PTT]
to receive.
t
Push and hold
[SQL] (
ATT
•
SET
)
to monitor the repeater
input frequency.
SCAN
S.MW
SET
then
SCAN
S.MW
SET
SET
■
1750 Hz tone